Using geopolymer resins for injection is a quick and effective way to fix problems that affect the stability of major roads, bridges, tunnels, and public transport networks. Geopolymers can be used to strengthen the soil under the road surface, as well as to raise and level sagging elements.
Premium Technologies often implements projects to restore a wide range of infrastructure facilities. The technologies that our company uses allow us to extend the service life of infrastructure facilities without disrupting the daily operation of the transport network or affecting its users.
Long-term operation of the roadbed can lead to its destruction. Various factors, such as heavy traffic congestion, environmental impact, and others, can lead to ground subsidence and bumps on the road, which in turn leads to accidents and a decrease in the load capacity of the road. This problem most often occurs in areas with high traffic intensity, parking lots and maneuvering areas for trucks, at crosswalks between the roadway entrance and the bridge, as well as on cargo platforms.
Premium Technologies geopolymer injection technologies allow you to raise and eliminate subsidence. This is achieved by injecting resin into the base of the road, which fills all the available space, which allows you to quickly and effectively strengthen the soil and level the roadbed. The solution is cost-effective and fast to use, with minimal inconvenience in the movement of traffic.
Problems with the foundation of the roadway can occur for various reasons, including the following:
Any of these factors can lead to a deterioration in the quality of the roadway, shortening its service life and reducing the capacity of freight transport.
Efficient and timely upgrades and maintenance are critical to ensuring the durability of the transport infrastructure. Premium Technologies technology allows you to avoid unnecessary budget expenses and reduce inconveniences and interruptions in the operation of public vehicles.
A geopolymer input method called Slab Lifting will help you restore the position of the roadway. It allows you to raise and level sagging sections, which simplifies the repair of emergency sections of roads, sections located near bridges, railways, port docks, loading platforms and other objects.
Using the Slab Lifting method is more effective than traditional road repair methods. Advantages of this method:
Vehicle traffic can be restored on the site repaired with geopolymers within 15 minutes after the work is completed. Compared to the time required to restore a road section with dismantling and restoration of the roadbed, which can take weeks or months, using the Slab Lifting method is a faster and more convenient solution.
Geopolymer injection technologies allow not only to restore the level of the roadway, but also to strengthen the ground under the roadway, or to strengthen the base when laying new highways and autobahns. When injecting geopolymers into the thickness of excessively moistened soil, excess moisture is displaced, which increases the roadbed’s support capacity. For this purpose, the method of Deep Stabilization technology is usually used.
If you have reached this block, then you care about the future of your property. By applying for help from qualified specialists in time, you will significantly save your time and financial costs.
The first step to save an object that is subject to destruction is to examine the building by specialists. This will help you avoid making rash or ill-considered decisions about measures aimed at stopping this process.
Premium Technologies specialists will go to the site and determine the type of foundation deformation and find out its causes. Depending on the data obtained, they will perform the necessary calculations, determine which measures will help to stop the destruction of the building, and which method of strengthening the foundation will be optimal.
Almost instant results
Only top-end equipment and tools
Post-project monitoring and responsiveness when improvements are needed. Communication 24/7
Parallel improvement of hydro -, heat-and vibration insulation characteristics of structures
Performing work using Premium Technologies technology does not require moving out residents or stopping the operation of the house.
The materials we use are durable and resistant to aggressive environments. Premium Technologies has the ability to guarantee works for up to 60 years.
We use Premium Technologies geopolymer resin injection technology, which is similar to a "microsurgical operation" without excavation and excavation or clutter management.
Cracks in the walls are closed as the building structure rises. Windows and doors will work normally again if there were misalignments before.
The injected material is environmentally inert and does not have a harmful effect on the environment.
